Chemical processes in electroplating plants often produce harmful exhaust air emissions. An effective exhaust air system is therefore essential to protect the…
Case study no. 10: KVS system in an electroplating shop Initial situation MAG values must be observed in electroplating operations. This…
Case study no. 20: Sulphuric acid dilution Initial situation Large quantities of sulphuric acid H2SO4 are required as an electrolyte in…
Case study no. 19: Redox flow battery Initial situation When used as a redox flow battery, vanadium is dissolved in sulphuric…
Case study no. 18: Jewelry electroplating Initial situation In a decorative electroplating plant in Spain, an existing system of electrically heated…
Case study no. 17: Phosphating Initial situation If base materials are to be phosphatized, the tanks must be tempered. During this…
Case study no. 16: Plating om Plastics (PoP) Initial situation Although surface coatings in electroplating are usually associated with the treatment…
Case study no. 15: Strip staining Initial situation Strip pickling is used for electroplating wires or thin metal plates. The material…
Case study no. 14: AquaZoo Initial situation Many fish and anemones do not like metal ions in their environment. At the same…
Case study no. 13: Biogas desulphurization Initial situation During the production of biogas, toxic and corrosive hydrogen sulphide gas is produced in…
Case study no. 12: Exhaust air purification: Biogas drying for large brewery Initial situation Biogas is a by-product of organic waste processing…
Case study no. 11: Biogas small Initial situation During the production of biogas, toxic and corrosive hydrogen sulphide gas and ammonia are…
+49 (0)2151 - 8777-12
+49 (0)2151 - 8777-12
