Worth knowing

Sulphuric acid dilution

Case study no. 20: Sulphuric acid dilution   Initial situation Large quantities of sulphuric acid H2SO4 are required as an electrolyte in…
Redox flow battery

Case study no. 19: Redox flow battery   Initial situation When used as a redox flow battery, vanadium is dissolved in sulphuric…
Heat exchanger for decorative electroplating

Case study no. 18: Jewelry electroplating   Initial situation In a decorative electroplating plant in Spain, an existing system of electrically heated…
Phosphating

Case study no. 17: Phosphating   Initial situation If base materials are to be phosphatized, the tanks must be tempered. During this…
Plating on Plastics (PoP)

Case study no. 16: Plating om Plastics (PoP)   Initial situation Although surface coatings in electroplating are usually associated with the treatment…
Strip staining

Case study no. 15: Strip staining   Initial situation Strip pickling is used for electroplating wires or thin metal plates. The material…
AquaZoo

Case study no. 14: AquaZoo Initial situation Many fish and anemones do not like metal ions in their environment. At the same…
Biogas desulphurization

Case study no. 13: Biogas desulphurization Initial situation During the production of biogas, toxic and corrosive hydrogen sulphide gas is produced in…
Biogas drying for large brewery

Case study no. 12: Biogas drying for large brewery Initial situation Biogas is a by-product of organic waste processing in animal husbandry,…
Calorplast biogas heat exchanger

Case study no. 11: Biogas small Initial situation During the production of biogas, toxic and corrosive hydrogen sulphide gas and ammonia are…
KVS system in an electroplating shop

Case study no. 10: KVS system in an electroplating shop   Initial situation MAG values must be observed in electroplating operations. This…
Heat exchangers in fish farming

Case study no. 9: Heat exchangers in fish farming   Initial situation Fish do not like metal ions. The parameters of temperature…